Supplying Demand W10497235 22" Dishwasher Lower Door Seal OEM Compatible Design Not Universal
Read Reviews
| Product Name | Rating | ||
|---|---|---|---|
| Image | Product Name154827601 Door Seal, 809006501 Lower Seal and 154701001 Splash Shield Kit, Dishwasher Bottom Door Seal Gasket Kit Compatible with Frigidaire Kenmore | Rating | |
| Image | Product NameSupplying Demand WD8X181 WR2X7054 Dishwasher Seal Kit Includes Shaft Seal & Push-On Nut | Rating | |
| Image | Product NameDishwasher Seal kit Replacement Compatible with Frigidaire, Includes 154827601 Tub Gasket, 809006501 Lower Seal, 154701001 Splash Shield | Rating | |
| Image | Product NameSupplying Demand 154568001 Dishwasher Lower Spray Arm | Rating | |
| Image | Product NameSupplying Demand 5304518927 Dishwasher Spray Arm Lower With Heat Shield Fits 5304507175 | Rating |
Features
- Alternate part numbers include: WPW10497235, PS11755651, W10195543, AP6022318
- If you're experiencing a water leak from the door of your dishwasher a fresh seal may be just what you need to keep your appliance in top condition. This is a quick and easy repair even for DIY buyers. Appliances should ALWAYS be unplugged before servicing. Required tools include a Torx 15 screwdriver, a 1/4' nut driver, a 3/16' nut driver, and some tape.
- Simply open the door, remove the lower dish rack, and remove the Torx screws around the perimeter of the door. THE SCREWS ALONG THE TOP OF THE DOOR WILL BE LONGER THAN THE OTHERS. Now you may remove the outer cover from the door and access the 1/4' screws for the plastic barrier and ground wire. With the plastic barrier out of the way remove the 3/16' screws holding the seal in place from the front of the machine.
- Open the door to remove the old seal and retrieve any dropped screws. With the new seal in place use an equal length of tape to secure the seal until you have reinstalled the 3/16' screws. REMOVE THE TAPE from inside now that the proper hardware is back in place. When reinstalling the plastic barrier with the 1/4' screws be sure to REATTACH THE GROUND WIRE.
- Finally, you can reinstall the outer panel of the door by lining up the tabs at the bottom then pushing the top back into place. Open the door and reinstall the Torx screws with the longer ones along the top. Slide the lower dishwasher rack into place, plug the appliance back in, and enjoy leak-free dishwashing yet again. For optimal performance you'll want your dishwasher to sit as level as possible.
- ›
- See more product details