PowMr Solar Charge Controller 40A - Solar Panel Charge Controller 12V 24V, Adjustable Parameter LCD Display Current/Capacity and Timer Setting ON/Off with 5V Dual USB

Read Reviews

System Voltage: 12V 24V AutoCharge current: 40A Max input voltage: 24V(12V system); 48V(24V system)Max input power: 520W(12V system); 1040W(24V system)USB output: Dual USB output, 5V/2.5ABatteries:Only fit for OPEN, AGM, GELSelf-consume: <10mATemperature: -35℃~+60℃Size/Weight: 193mm*51mm*98mm/390gFloat charge: 13.7V(defaul,adjustable)Discharge reconnect voltage:12.6V(defaul, adjustable)Discharge stop voltage: 10.7(defaul, adjustable)Turn ON/OFF light voltage: Solar pannel 8V.Load mode: 1. 【24H】 Load always turn on. [except your battery's voltage is too low to read] 2. 【0H】Light control mode. [controller recognize voltage auto, if solar panel's voltage under 8V, Load will turn on] 3. 【1-15H】Light controller+ Set an specific time to turn off your load. MENU：1. Press to browse parameters. 2.Press and hold about 3 seconds to enter detail setting UP: Press to increase value DOWN: Press to decrease value TIPS OF INSTALLTION: (ALWAYS CONNECT BATTERY FIRST!!) Step 1, Screw the adjustment screw counter clockwise until the plates moves down. Step 2, Please peel off the coating of the cable tip by about 8 to 10 mm, then insert the wire into the new opening between the plate and the "top" of the Terminal hole, not under it. Step 3, Screw the adjuster clockwise and the plate will move upwards thereby squishing the wire in the Terminal hole, Make sure all connections are tight. NOTE : 1) Charge Controller should connect in the order of 1)Battery array 2)Solar panels 3)DC load .The disassembly sequence is contrary to the wiring order.2) Make sure batteries's voltage between 9V-15V for 12Volt system and 18V-30V for 24Volt system so that the Charger controller can recognize the normal battery type and system in first connection.

	Product Name	Rating
Image	Product Name30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Dual USB Charge Regulator Intelligent, Adjustable Parameter LCD Display and Timer Setting ON/Off Hours	Rating
Image	Product Name20A Solar Charge Controller,12V/24V Solar Panel Controller Battery Intelligent Regulator with USB Port Display，Adjustable Parameter Backlight PWM Auto LCD Display and Timer Setting ON/Off Hours	Rating
Image	Product NameBYGD 10A Solar Charge Controller, Solar Panel Charger Controller 12V/24V, Multi-Function Adjustable Parameter Backlight LCD Display with 4 USB Ports Timer Setting PWM Auto Parameter	Rating
Image	Product NamePhoenician Energy 20A Solar Charge Controller 12V/24V Auto, Solar Panel Charge Controller 10Amp Solar Regulator with Dual USB LCD, Backlight LCD Display and Timer Setting ON/Off (20A)	Rating
Image	Product NameGCSOAR Solar Charge Controller 40A 12V 24V Auto PWM Solar Panel Charger Regulator Parameters Adjustable LCD Display for Leaded,Gel(AGM),Flooded Type (40A, 12V/24V)	Rating

Features

❶This 40a charge controller compatibility with 12V and 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float), 12V(480W) / 24V(960W) input, Dual USB can give your electronic product max 5V 2A.
❷Backlight LCD display PV/ Battery/ Load charge and discharge parameter. Adjustable Floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller. ADD Feature: Charge and Discharge Current, Charge and Discharge energy recording function.
❸This solar charge controller fit for Lead-acid batteries (OPEN,AGM,GEL) with mutiple load timer. Load should be DC. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
❹Mutiple Electric Protection - overcharge protection, overdischarge protection, Dual MOSFET anti-backflow protection, overheating protection, Under-voltage discharge, effectively ensure the system stability and more safe for home, industrial,commercial etc.