60A Solar Charge Controller, Solar Panel Charge Controller Charge Regulator Intelligent with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display
Read Reviews
Color:Blue
Specifications: Load: Light Control Charging Mode: PWM System Voltage: 12V 24V Max Solar input(Solar Panel): 36V(24V battery) 18V(12V battery) Max input power: 780W(12V system); 1560W(24V system) Equalization:14.4V(sealed) 14.2V(Gel) 14.6V(flood) Float charge:13.7V(defaul,adjustable), 12.0-15.0V Discharge stop voltage: 10.7V(defaul,adjustable), 9.0-11.5V Discharge reconnect voltage: 12.6V(defaul,adjustable), 11.0-13.0V Rated current: 60A Self-consume: <10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature: -35℃~60℃ USB output: 5V/2.5A Max Dimension: 13.4*7*3.5cm LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value. System Connection: 1.Connect the battery to the charge regulator - plus and minus. 2.Connect the photovoltaic module to the regulator - plus and minus. 3.Connect the consumer to the charge regulator - plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller! Note: The charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, well-ventilated place Attention: 1.Press the [Down] button to ON/OFF load manully at main display. 2.The work mode is working as below: [24H] - load output 24hours [1-23H] - load on after sunset and closed after setting hours [0H] - Dusk to dawn 3.Batteries: Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Package includes: 60A Solar Charge Controller*1 User Manual*1
Features
- 60A Solar Charge Controller - Rated Discharge Current: 60A; USB Output Voltage: 5V/2.5A; Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports; 3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge. Please notice the controller might be power off if the battery voltage is too low.
- Multiple Protection Functions - Solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 4-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
- Battery Type - The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
- LCD Display - Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
- Easy to Install and Operate - The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production.