The Sunforce 60012 7 Amp Charge Controller prevents overcharging and discharging of 12 Volt batteries. It is intended for use with 12 Volt solar panels and maintains 12 Volt batteries in a fully charged state. It can handle up to 7 amps of array current and up to 105 watts of solar power. The controller is easy to use with a yellow charging light that indicates that your battery is charging, and a green light that indicates a fully charged battery.

Sunforce 7 Amp Charge Controller

The C60 is a rugged 60 Amp controller that is the perfect controller for handling any DC charging source.   Xantrex charge controllers are versatile and reliable. The C60 is a 100% solid state, microprocessor-driven controller which is UL and cUL listed. Like all Xantrex charge controllers, the C60 controller is flexible and can be configured for a variety of applications.  The C60 is excellent for solar panel battery charging, DC load control (such as a low voltage disconnect switch) or for DC diversion operation which is vital for most wind turbines and hydroelectric generators. To manage larger flows of power, the C60 is the ultimate charge controller for most DIY wind and solar systems.

Xantrex C60 Solar Charge Controller 60 Amps

The perfect solar charge controller for RV's, boats, and trucks with dual battery systems, one for appliances and the "engine" battery. The SunSaver Duo is an advanced dual battery bank controller for RV's, trucks, caravans and boats. It will charge two separate and isolated batteries such as a "house" and an engine battery. When one battery is fully charged, the solar charging is switched to the other battery. Features include easy to read backlit remote meter with cable and user adjustable settings. Specifications: Model #: SSD-25RM Battery Vdc (voltage direct current): 12V Solar Amps: 25 A Weight: 3 lb. / 1.36 kg Dimensions: 6.7" x 2.2" x 1.6" / 170.2 x 55.9 x 40.6 mm Warranty info: 5 year warranty from manufacturer

Morningstar - SunSaver Duo 25A PWM Solar Charge Controller for 12V Batteries, Lowest Fail Rate in The Industry, Built-in Diagnostics, Includes Remote Meter Display (SSD-25RM)

The Xantrex MPPT Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries. The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems.

Two or three-stage charging process, with manual equalization to maximize system performance and maintain expected battery life
 
Maximum Power Point Tracking (MPPT) to deliver the maximum available power from a PV array to a battery bank
 
Configurable auxiliary power output
 
Two-line, 16-character liquid crystal display (LCD) and four buttons 
for configuration and system monitoring in stand-alone applications
 
Battery Temperature Sensor (BTS) to provide automatically temperature-compensated battery charging
 
The Charge Controller is able to communicate its settings and 
activity to other Xanbus-enabled devices.

Schneider Electric Conext MPPT 60 PV Solar Charge Controller

Battery Tender Charge controller for any solar panel. Panel is not provided.

Battery Tender 5-45W Automatic Solar Controller

The C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate. Quick and simple installation/operation.

Xantrex C40 Solar Charge Controller 40 Amps

Compatible with 12 and 24 volt battery banks (Charging/dumping voltage setting are user settable) Works with wind turbines, solar panels and hydro generators 100% solid state controller (no mechanical relays or solenoids) Pulse width modulated (PWM) controlled 2 year warranty

Xantrex C35 Solar and Wind Turbine Charge Controller

Go Power! 30 Amp Solar Regulator features the Go Power! GP-PWM-30-UL w/Bluetooth. It is a 30 amp pulse width digital solar regulator that is used to protect the batteries from overcharging when using a solar panel. This regulator can handle up to 30 amps of solar charge and charges the batteries using a 4 stage battery charging algorithm. The GP-PWM-30-UL can charge any type of batteries and is selectable for Lithium, wet cell, AGM, and gel batteries.

Go Power! By Valterra GP-PWM-30-UL Solar Controller - 30A, Digital , Black

The Sunkeeper 6 can be mounted in any 1/2" knockout, such as in the junction box on the back of the solar panel, or in a standard breaker or disconnect electrical box. It may also be mounted to any surface with the included bracket and two screws. The LED light indicates that the unit is charging the battery. Simple lug connections or they may be cut and stripped for connection with wire nuts or barrel connectors. Instructions included. 5 year manufacturer warranty.

Morningstar SunKeeper Charge Controller | World Leading Solar Controllers & Inverters

Overview  The SB2512iX-HV charge controller featuring our patented MPPT technology for 12V battery. This controller is ideal for RVs and Marine applications with its auxiliary output for charging a second battery, and can utilize a remote display with its IPN connectivity. When programmed with the IPN ProRemote or UCM, it can be used for charging Lithium batteries. It can communicate with other Blue Sky Energy charge controllers allowing increased flexibility, optimization in system design, and improve reliability by dividing a large system with multiple controllers.   Features:  - MPPT BUCK technology - 3-Stage charge plus Equalization (if enabled)  - Battery system 12V - Surface or Flush Wall mounting - Auxiliary Output max 25A with Low Voltage Disconnect (LVD)  - Temperature compensated charge profile with battery temperature sensor ASIN: B007S3HWDA - Fully programmable (for Lead-Acid or Lithium batteries) by IPN ProRemote-S remote display ASIN: B007S2VT9E - Made in the USA - 5-Year Warranty  Specifications:  - Max. Recommended Panel Power: 340W (36-cell panel) or 270W (60-cell panel)  - Rated Battery (Output) Current: 25A (36-cell panel) or 20A (60-cell panel)  - Absorption Voltage: 14.2V  - Float Voltage: 13.2V  - Equalization Voltage: 15.2V (if needed)  - Max Panel Voltage: 50V - Max Recommended Panel Voc @ STC 40V - Operating Temp. Range: -40°C - 45°C - Battery/Panel Connections: 4-position terminal block for 10-20 AWG wire - Dimensions: 5.3x5.3x2.5" - Certifications: CE, FCC, RoHS

Blue Sky Energy Solar Boost SB2512iX-HV, 25A MPPT Solar Charge Controller for 12V Battery. Auxiliary Output for Dual Battery Charge or 25A LVD Load Output

Overview  The SB3024DiL charge controller featuring our patented MPPT technology for 12/24V battery. This controller is ideal for RVs and Marine applications with its auxiliary output for charging a second battery, and can utilize a remote display with its IPN connectivity. When programmed with the IPN ProRemote or UCM, it can be used for charging Lithium batteries. It can communicate with other Blue Sky Energy charge controllers allowing increased flexibility, optimization in system design, and improve reliability by dividing a large system with multiple controllers.   Features:  - MPPT BUCK technology - 3-Stage charge plus Equalization (if enabled)  - Battery system 12V or 24V autodetect - Onboard display and LED indicator for battery status - Auxiliary Output programmed for a 20A DC Load with Low Voltage Disconnect or for charging a secondary battery  - Temperature compensated charge profile with battery temperature sensor ASIN: B007S3HWDA - Fully programmable by IPN ProRemote-S remote display ASIN: B007S2VT9E - Made in the USA - 5-Year Warranty  Specification:  With 12V battery:  - Max. Recommended Panel Power: 540W (36-cell panel) or 400W (60/72-cell panel)  - Rated Battery (Output) Current: 40A (36-cell panel) or 30A (60/72-cell panel)  - Absorption Voltage: 14.4V  - Float Voltage: 13.2V  - Equalization Voltage: 15.2V (if needed)  With 24V battery:  - Max. Recommended Panel Power: 800W (72-cell panel) - Rated Battery (Output) Current: 30A - Absorption Voltage: 28.8V  - Float Voltage: 26.4V  - Equalization Voltage: 30.4V (if needed)   - Max Panel Voltage: 57V - Max Recommended Panel Voc at STC 45.6V - Operating Temp. Range: -40°C - 40°C - Battery/Panel Connections: terminal block for 2-14 gauge wire - Dimensions: 6.86 x 6.6 x 3.38" - Certifications: UL/CSA, CE, FCC, RoHS

Blue Sky Energy Solar Boost SB3024iL MPPT Charge Controller 40A/30A with display, 12V/24V battery. Auxiliary Output for Dual Battery charge or 20A LVD Load Output

Size:1m




























Offgridtec Module Connection Cable with Cable CrossSection 4 mm²

Offgridtec 1m Connection Cable from Solarpanel to Solar Charge Controller 4mm² / AWG11 Resistant Against: UV, Ozone, Weather, Water with Original MC4 Connector007435

Size:6 A




























Compact "point of use" design mounts directly to the solar module junction box or module frame and eliminates the need for an additional controller housing.  High temperature rated – to 70° for operation in high temperatures at the solar module; no need to de-rate.  Rugged design – approved for outdoor use without an additional enclosure.  IP65 rated with UV-resistant case; epoxy encapsulated electronics and watertight connection to junction box.  Ideal for oil/gas applications. Approved for use in hazardous locations: Class 1, Division 2, Groups A-D.

FlexMax80 FM80-150VDC Charge Controller FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system. The FLEXmax Charge Controllers are the revolution. Developed by OutBack Power, its features include support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character-display shows the current status and logged system performance data for the last 128 days at the touch of a button. The FLEXmax family of charge controllers is the latest advanced improvement in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The ground-breaking FLEXmax MPPT software algorithm is both continuous and active, it increase your photovoltaic array power yield up to 30% compared to non-MPPT controllers. With the technology of active cooling and intelligent thermal management cooling, the FLEXmax charge controllers can operate at their full maximum current rating in ambient temperatures as high as 104F (40C) (Optional Remote Temp Sensor Recommended for optimal operation- Sold separately). . Features: Built-in 128 days of Data Logging Programmable Auxiliary Control Output. Fully OutBack Network Integration Capable (with use of the OutBack HUB - Sold separately). Programmable Battery Voltages from 12 VDC to 60 VDC. Advanced Continuous Maximum Power Point Tracking Increases PV Array Output by up to 30%. Specifications: Nominal Battery Voltages: 12, 24, 36, 48

Outback Flexmax 80 FM80 MPPT 80 AMP Solar Charge Controller

This 30 Amp solar charge controller is an intelligent and multifunctional solar charger controller. These serial products adopt customized LCD display screens, which make operations on the interface rather convenient. All of the controlling parameters can be reset to satisfy user needs.

HQST PWM Solar Charge Controller 12V 24V Auto, 30 Amp Positive with LCD Display and 5V 1A USB Port, Compatible with Sealed, Gel, Flooded Lead-Acid and Lithium Batteries

FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C). Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration. FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system. Capable of up to 140VDC solar open circuit voltage Max input and user adjustable for out put up to 60-amps at charging nominal batteries configured for 12, 24, 36, 48, 60 VDC battery banks efficiently. Specifications: Nominal Battery Voltages: 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up) Maximum Output Current: 60 amps @ 104� F (40�C) with adjustable current limit PV Open Circuit Voltage (VOC): 150 VDC absolute maximum coldest conditions / 145 VDC Standby Power Consumption: Less than 1 Watt typical Power Conversion Efficiency: 98.1% @ 60 Amps in at 48 VDC System voltage - Five Stage charging algorithm.

OutBack Power FM60-150VDC FLEXMax 60 Charge Controller

20A , VS2024BN ,12V/24V Auto Work ,Common Negative Grounding , EPsolar PWM Solar charge controller New ViewStar series ,  ViewStar series solar controller is designed for off-grid solar system, such as street light, solar home system or small power station etc.  It has LCD display, reliable battery charging , full electronic protection, and programmable parameters.  This Viewstar BN series is common negative controller, with LCD display, working data programmable, It has communication function via RS485 port to PC monitoring software, realizing real-time monitoring and battery management parameter setting.  Technical specifications:  Model : 20A , VS2024BN , 12V/24V auto work  Battery input voltage range : 8~32V Grounding : Common negative Self-consumption : ≤15mA(12V); ≤10mA(24V);  Communication: RS485 / RJ45 interface Terminals : 8AWG(10mm 2 )  Overall dimension : 162*100*50mm Weight 0.4kg Enclosure : IP30  Electronic protections:  ● PV short circuit protection ● PV reverse polarity protection● Battery overcharge protection  ● Battery over discharge protection ● Battery reverse polarity protection ● Load overload protection  ● Load short circuit protection ● Overheating protection Packge :  1 x VS2024BN solar charge controller  1 x Manual

Renogy ViewStar 20 Amp Negative Grounded PWM Charge Controller with LCD Display

SEE PHOTO GALLERY FOR ALL TECHNICAL INFORMATION AND DIMENSIONAL DRAWING. WindyNation's P30 Solar Charge Controller uses advanced microprocessor technology to properly charge and maintain the charge of 12 and 24 volt batteries. The P30's PWM (pulse width modulated) battery charging technique increases the lifetime of batteries by properly charging the battery through a Bulk, Absorb and Float charging process. The PWM capability also allows the controller to operate very efficiently and consume very little power.

Sunforce 7 Amp Charge Controller

Xantrex C60 Solar Charge Controller 60 Amps

Morningstar - SunSaver Duo 25A PWM Solar Charge Controller for 12V Batteries, Lowest Fail Rate in The Industry, Built-in Diagnostics, Includes Remote Meter Display (SSD-25RM)

Schneider Electric Conext MPPT 60 PV Solar Charge Controller

Battery Tender 5-45W Automatic Solar Controller

Xantrex C40 Solar Charge Controller 40 Amps

Xantrex C35 Solar and Wind Turbine Charge Controller

Go Power! By Valterra GP-PWM-30-UL Solar Controller - 30A, Digital , Black

Morningstar SunKeeper Charge Controller | World Leading Solar Controllers & Inverters

Blue Sky Energy Solar Boost SB2512iX-HV, 25A MPPT Solar Charge Controller for 12V Battery. Auxiliary Output for Dual Battery Charge or 25A LVD Load Output

Blue Sky Energy Solar Boost SB3024iL MPPT Charge Controller 40A/30A with display, 12V/24V battery. Auxiliary Output for Dual Battery charge or 20A LVD Load Output

Offgridtec 1m Connection Cable from Solarpanel to Solar Charge Controller 4mm² / AWG11 Resistant Against: UV, Ozone, Weather, Water with Original MC4 Connector007435

Morningstar SunKeeper Charge Controller | World Leading Solar Controllers & Inverters

Outback Flexmax 80 FM80 MPPT 80 AMP Solar Charge Controller

HQST PWM Solar Charge Controller 12V 24V Auto, 30 Amp Positive with LCD Display and 5V 1A USB Port, Compatible with Sealed, Gel, Flooded Lead-Acid and Lithium Batteries

OutBack Power FM60-150VDC FLEXMax 60 Charge Controller

Renogy ViewStar 20 Amp Negative Grounded PWM Charge Controller with LCD Display

WindyNation P30 30A Solar Panel Regulator Charge Controller 12V 24V 390W 780W