EPEVER MT-50 Remote Meter LCD Display fit for Tracer BN series MPPT Charge Controller NOT FIT FOR RENOGY & HQST MPPT

Size:MPPT 30A - No Display




























Morningstar’s TriStar MPPT solar controller with TrakStar Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW.

Morningstar - Tristar 30A MPPT Solar Charge Controller for 12V/24V/48V Batteries, Lowest Fail Rate in The Industry, Built-in Diagnostics, RTS Included, (TS-MPPT-30)

Size:20A




























Automatically manage the working of solar panel and battery in solar system.   Color: Black  Rated voltage: 12V or 24V  Rated charging current: 20A  Rated load current: 20A  Over Charging Voltage: 14V / 28V  Over Charging Revover Voltage:13.2V/26.4V  Floating Charging Voltage:13.5V/27V  Over Discharging Voltage:10.8V/21.6V  Over Discharging Recover Voltagey: 12.3V/24.6V  Load over-voltage:16.5V/34V  Load over recover voltage:15V/30V  Max Solar Battery Open circuit voltage:25V/36V   Working temperature: -20 ~ +60℃   Item size: 10.2 * 9.5 * 3.8cm / 4 * 3.7 * 1.5in  Item weight: 145g / 5.07oz  Package size: 11 * 10 * 4.5cm / 4.3 * 3.9 * 1.8in  Package weight: 154g / 5.39oz    Package included:  1 * Solar charge controller  1 * User's manual It is easy install, if you get trouble, you may have to check all the connection in the system, or contact us for help.

yueton Solar Panel Charge Controller 20a 12v/24v Solar Panel Regulator Adapter Charge Controller for Street Lamp Base Station

Replaces eleven of the industries’ leading controllers with just one model. The Brat is simply the most versatile solar controller in its class. The Brat is a finely-tuned solar PWM charger capable of providing up to 30 Amps of charging current, with class-leading lighting and load control features including one-of-a-kind Solar Clock. Rain-proof out of the box, and supporting dead-battery charging and low-voltage load disconnect, The Brat is perfect for outdoor, marine, RV, and unattended remote applications. The Brat doesn’t skimp on features, including temperature-compensated charging, manual and 30-day automatic equalize, and at an affordable price too!

Midnite Solar, Charge Controller, 20A with 10A load control, 30A charger without load control, NEMA3R, Qty. 1, MNBRAT

Size:20A Charge controller




























WindyNation’s P30L and P20L solar charge controllers are premium grade PWM solar controllers. The digital display provides all necessary solar system information and also serves as a user interface for adjusting the charge controller’s settings. It is the perfect solar charge controller for an RV, boat, small cabin or any other off-grid installation, where user configuration and system information is important.

WindyNation P20L LCD 20A PWM Solar Panel Regulator Charge Controller with LCD Digital Display and User Adjustable Settings

XANTREX CHARGE CONTROLLER 35AMPS C35

The MPPT Control lets you see the status as well as setup all BlueSolar MPPT Charge Controllers that have a VE.Direct communications port. The new MPPT Control is mounted in the familiar BMV-700 series housing, maintaining a consistent and professional look to your panels and systems monitoring equipment. Features View live status information, including solar watts, battery voltage, charge current, load current and more.

Victron Energy MPPT Control

Description:  This is a new intelligent solar controller, which is equipped with industrial-grade STM 8 microprocessor to control the charge and discharge process. And, it has perfect and liable battery charge and discharge period management. The charge circuit is characterized by high efficiency and low consumption by controlling the MOSFET of the ultra-low internal resistance with PWM. This controller has multiple load control modes and is adaptable to different industries.  The product can be applied to the following occasion:  1). Outdoor environment monitoring system  2). Automatic control system for agriculture and garden  3). Solar power system  4). Communication station, WIFI hotspot  5). Street lighting system  6). other systems which are supplied by solar energy and have requirements power EMI indicator   Note: You had better connect to the battery first when you operate the system   Specification:  Color: Black  Size: 22 x 12.6 x 4.6 cm  Package Weight: 1000g  System voltage of PV: 24V/48V  Compatible battery: lead-acid cell  Charge way: 3-state- PWM Charge  USB Charge port: 5V 1A    Note:  During the installation and usage, please make sure to obey by the following safety regulations and notices to avoid the damage to controller.  1). There is no maintainable part in the controller. User cannot disassemble or repair the controller without permission.  2). before installing and adjusting the connection of controller, please make sure to disconnect the connection of photovoltaic panel and the fuse or breaker around battery terminal.  3). after installation, ensure all the wire connections are reliable to avoid heat accumulation for virtual.    What is included:  1 X Solar Controller  1 X User Manual

BlueFire Regulator LCD Solar Charge Controller 60A 12V/24V Autoswitch Solar Panel 1500W for Battery Charging

Victron Energy BlueSolar MPPT 100V 50 amp 12/24-Volt Solar Charge Controller

Size:40 Amp




























The new and improved Commander 40A MPPT charge controller will take your solar system to the next level. Unlike a basic PWM Controller, this charge controller is compatible with sealed lead-acid, flooded, and gel batteries (all deep cycle). This controller keeps the batteries from becoming over-charged or discharged, increasing the longevity of your batteries. This high tech controller features Multiphase Synchronous Rectification and Maximum Power Point Tracking technologies, which increases charging efficiency and improves system performance. And with the included MT-50 Tracer Meter you will have full control over your controller. This controller and tracer meter combo will allow your system to run more efficiently then ever!  Specifications Nominal System Voltage: 12V/24V Auto recognition Rated Battery Current: 40A Max. Solar Input Voltage: 150VDC Maximum Battery Voltage: 32V Communication: RSJ45 Dimensions: 11.90 x 7.19 x 2.50 inches Max. Terminal: 25mm2, 4 AWG Max. Solar Input Power: 520W (12V), 1040W (24V) Rated Load Current: 20A Self-consumption: ≤30mA (24V) Temp. Compensation: -5mV/°C/2V (default) Weight: 6.39 Lbs Mounting Oval: 0.30 x 0.18 inches Max. PV Input Short Current: 50A

Renogy Commander 40 Amp 12V/24V MPPT Negative Ground Solar Charge Controller Regulator Compatible with Sealed Lead-Acid, Flooded, Gel Batteries and MT-50 Tracer Meter

Size:150V 45A MC4




























Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. **Note: Phone or Tablet Programming, real-time data and history display options as seen in photos require VE.Direct Bluetooth Dongle available in our Store as Optional Extra

Victron Energy BlueSolar MPPT MC4 150V 45 amp 12/24/36/48-Volt Solar Charge Controller

Victron Energy BlueSolar MPPT MC4 150V 70 amp 12/24/36/48-Volt amp Solar Charge Controller

Automaxx Windmill 600W (12V/24V) (50A/25A) Wind Turbine Generator kit Wind Power MPPT Charge Controller Included (Amp, Volt & Watt Display) + Automatic and Manual Braking System. DIY Installation

The PT-100 is a Maximum Power Point Tracker (MPPT) charge controller designed to harvest the maximum available energy from the PV array and deliver it to the batteries. The PT-100's MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current to 100 amps and battery voltage to fully charge the battery. One of the many exciting features of this controller is its high input voltage rating. This controller has a maximum PV operating voltage of 187 VDC, and a maximum pv input voltage of 200 VDC plus battery voltage, or 240VDC, which ever is lower. This allows for larger strings of modules, which saves costs in parts like wiring and breakers. Additional information can be found at the spec sheet linked below. Specs and Features: A single controller supports a large PV array up to 6600 W. Larger PV arrays may be used because the PT-100 is current limited to 100 amps for maximum harvest. Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage. The PT-100 will produce up to 100 amps regardless of battery voltage Maximum Power Point Tracking (MPPT) technology for increased PV power output efficiency Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information. Integrated PV GroundFault Detection and Interruption/ Indication, with pre-fault leakage/ diagnostic metering An integrated PV ArcFault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC) Article 690.11 requirements. The PT-100 is designed to work with a Magnum Panel (MP) or MiniMagnum Panel (MMP). It provides room and access to PV and battery disconnect breakers. The PT-100's software can be updated on site.

Magnum Energy PT-100 Maximum Power Point Tracker (MPPT) Charge Controller, Designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP), Single controller supports a large PV array up to 6600W

MidNite Solar CLASSIC 150-SL MPPT Charge Controller  MidNite Solar offers an industry first, an extended warranty for all the Classic MPPT charge controllers. Six months prior to the end of the warranty period customers can ship their Classic back to MidNite Solar with a check for $147 dollars plus shipping and we will replace any wearable parts and do a general tune-up. This will extend the warranty by 2 additional years, another good reason to purchase a Classic.  The Classic SL-150 MPPT Charge Controller is a simplified SOLAR ONLY version of the Classic 150 with streamlined menus. The Classic SL-150 has a graphics panel and ground fault but no arc fault or Ethernet capabilities. The Classic SL-150 has a maximum output current of 96 amps, an operating voltage of 150 volts and works with 12 to 72 volt battery systems. As with the whole Classic Line, the Classic 150-SL has MidNite’s exclusive HyperVOC which extends VOC limits when needed.. With a streamlined menu, these SOLAR only MPPT charge controllers are easy to setup and a breeze to install!  2 Aux Ports Follow-Me function

MidNite Solar CLASSIC 150-SL MPPT Solar Charge Controller

Size:20A MPPT




























The Renogy Rover Series Charge Controller is suitable for various off-grid solar applications. It protects the battery from becoming over-charged by the solar modules and over-discharged by the loads. The Rover’s charging process has been optimized to extend battery life and improve system performance. It includes a 4-stage battery charging algorithm for rapid, efficient, and safe charging. The Rover is the perfect addition to just about any solar power system, as it allows the system to function without wasted energy.

Renogy Rover 20 Amp 12V/24V DC Input MPPT Charge Controller Auto Paremeter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery, 20A, black

ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V

This 80 amp Solar controller is a kind of intelligent solar panels charger controller, it’s a great a choice when you demand a high performance, efficient, versatile and economical charge controller for your advanced power system. the 80amp controller features include a friendly interface LCD display shows the current status and system performance data, the system parameters are designed in symbol guide style that makes setting accessible to anyone. the whole parameters setting is flexible and can be fully meet the requirements of various applications. considering the price, all the features make this controller the most cost-effective 80a controller in the market.Solar Panel Power Input Requirement60A Model Handle Solar Panel Power: 720W/12V 1020W/24V 80A Model Handle Solar Panel Power: 960W/12V 1360W/24V Technical Parameter Model: 80A PWM Solar Charge Controller Rated Working Current: 80 Amps Rated Working Voltage: 12V/24V DC Auto Voltage of Solar Panel: ≤50V Float Charging Voltage (Settable) :13.7V/27.4V Low Voltage Protection (Settable) :10.7V/21.4V Low Voltage Recovery (Settable) :12.5V/25.2V No Load Loss : <30mA Loop Voltage Drop : ≤200mV Temperature Compensation: -4mv//cell Installable Max. Cable: 3# AWG (25mm2) Working temperature: -20℃~50℃ / -4℉~122℉ Storage temperature: -30℃~70℃ / -22℉~158℉ Temperature Requirement: ≤90%, No Condensation Dimension: 130 mm×188 mm×62 mm Mounting Hole Spacing: 98 mm×178 mm -Φ5 / 3.85 in×7 in -Φ0.2 in Weight: 590g / 20.81 oz

80A Solar Charge Controller PWM PV Solar Panel Charger Regulators with LCD Monitor 12V 24V Auto 960W 1360W Large amp Power Input Energy Controller ZHCSolar