Size:250-Volt, 100 Amp - Tr




























"A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged."

Victron Energy SmartSolar MPPT Tr 250V 100 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

This connects Victron's VE Bus port to a USB connection that you can plug in to your PC. Every Phoenix Multi/MultiPlus is ready to communicate with a computer through its RS-485 data port. All you need to link to your PC and be able to set and read out all parameters is the data link as shown plus an ethernet cable or Victron UTP cable (not included). Moreover, all Victron Energy products equipped with an RS-485 data port can easily be integrated in a computerised monitoring and control system, such as VE.Net from Victron Energy. VE-Configure software is required. Software can be downloaded for free from the Victron website. Software can be run in demo mode without having this or any external device present. For most purposes the Mk3 version will be no different than the previous Mk2 version, it was just redesigned to allow it to communicate with a wider range of devices. Use the MK3-USB to connect the following products to a computer for configuration Multi MultiGrid MultiPlus Quattro Inverter (only models with a VE.Bus communication port) ECOmulti EasySolar EasyPlus

Victron Energy Interface MK3-USB (VE.Bus to USB)

PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto - Max 160VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium Battery【Software Update Version】(MPPT-60A)

EPEVER MPPT Solar Charge Controller 30A 12V 24V Auto, Solar Charge Controller Max 100V Input Negative Grounded Solar Regulator, for Lead-Acid and Lithium Batteries

Victron Energy BlueSolar MPPT 150-Volt 35 amp Solar Charge Controller maintains battery health, extending its life. A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest.

Victron Energy BlueSolar MPPT 150V 35 amp 12/24/36/48-Volt Solar Charge Controller

Overview  All weather charging, in any condition! The waterproof GVB-8-Pb-36V-WP charge controller with MPPT allows a lower-voltage solar panel to charge higher-voltage batteries. Want to charge a 36V battery with a 36/60-cell solar panel? No problem. True MPPT delivers consistent performance! The advanced electronics inside the controller are encased in a proprietary potting compound making them ideal for golf-cart, marine, and vehicle applications where they are exposed to the elements.   Features:  - MPPT BOOST technology  - LED indicator for battery state of charge - 98% Peak Efficiency - High-speed MPPT Tracking (15 times per sec)  - Advanced electronic protection (over-temperature, panel overload, battery and panel switched, reverse battery polarity, reverse panel polarity)  - Advanced Multi-Stage charge profile - In-line Fuse 58V/10A battery side - Tiny self-consumption - Radio Silence, HAM Radio friendly - Made in the USA - 5-Year Warranty  Specifications:   - Max. Recommended Panel Power: 325W - Rated Panel (Input) Current: 8A - Minimum Panel Voltage for Charging: 5V - Minimum Battery Voltage for Operation: 9.5V - Maximum Input Panel: 60V - Recommended Max Panel Voc at STC: 50V - Max. Recommended Panel Vmp at STC: 41V - Maximum Input Short Circuit Current: 8A - Bulk Voltage: 43.2V - Absorption Voltage: 42.6V - Absorption Time: 2 hours - Float Voltage: 41.4V - Operating Temperature: -40°C – 85°C - Maximum Full Power Ambient: 70°C - Standby Consumption: 6mA - Environmental Protection: IP68 (Waterproof)  - Connection: Flying Leads, 16 AWG tinned wire, pre-stripped - Weight: 10.3oz., 290 g - Dimensions: 5.5x3.2x2.2”  - Certifications: CE, FCC, RoHS

Genasun GVB-8-Pb-36V-WP, 8 A (Input) 325 W Solar Panel, Waterproof Boost MPPT Solar Charge Controller for 36 V Lead-Acid Battery

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display

10A Waterproof Solar Charge Controller PWM Solar Panel Regulator for 12V/24V Solar Charging

Size:150-Volt, 35 Amp, 12/24/36/48V




























"A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged."

Victron Energy SmartSolar MPPT 150V 35 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter + Temperature Sensor PC Monitoring Cable[Tracer4215BN]

This is a new intelligent 80a Solar Charge Controller, the controller has an efficient charging system and can handle high power input reach to 1920W, this controller equipped with industrial-grade STM 8 microprocessor to control the charge and discharge process. And, it has perfect and liable battery charge and discharge period management. The charge circuit is characterized by high efficiency and low consumption by controlling the MOSFET of the ultra-low internal resistance with PWM. This controller has multiple load control modes and is adaptable to different industries. the housing of this controller is made of superior quality ABS material that is extra durable.USB output port also equipped with this controller for electrical devices charging. Solar Charge Controller PWM 80A 12V/24V for Lighting System  Compatible With 1920W(24V) Solar Panel with Dark Activated Function  Compatible with MAX 1920W Solar Panel 12V/24V Auto Switch Settable Operating Mode Of Load One Key Load ON/OFF One Key Factory Setting Restore 5V 500mA USB Port Output Product Specification: Charge Control Mode: PWM Rated Current : 80A Rated voltage: 12V/24V Automatic Identification Max input Power: 960W(12V), 1920W(24V) Installation Cable Area: 3# AWG (25mm2) Maximum Voltage of solar panel: 48V Float Voltage: 13.8V/27.6V Low Voltage Disconnection: 10.7V/21.4V Low Voltage Re-connection: 12.5V/25V No load loss: <30mA loop voltage drop:<200mV Temperature compensation: -4mV/Cell/°C Operating Temperature: -10℃~60℃ Storage temperature: -30℃~70℃ Humidity Requirement: ≤90％ Dimension: 128 mm×188 mm×61mm Mounting hole spacing: 98mm×178 mm --Φ5 Net Weight: 720g Package List:  1 x 80A Solar Charging Controller 1 x Temperature Sensor 1 x User Manual

Y&H 80A Solar Charge Controller 12V 24V LCD Display USB Output Solar Panel Controller Multip Circuit Protection Solar Charger Discharge Regulator for Lighting System,with Dark Activated Function

Overview  Blue Sky Energy’s Sun Charger 30 (SC30) solar charge controller charges 30A for 12V-nominal batteries. The SC30 uses precise PWM charge voltage control combined with a sophisticated multi-stage charge algorithm to optimally charge flooded, GEL, AGM lead-acid, or Lithium chemistry batteries. To periodically condition flooded lead-acid batteries the SC30 will also perform a manual or automatic Equalization charge. The SC30 is fully programmable, through the onboard display is possible to program the charge profile for any type of Lead-Acid and Lithium batteries and gmonitor real-time data from battery and solar array.   Features:  PWM technology Multi-Stage charge control (plus Equalization if enabled) Built-in digital display for real-time data and charge profile settings Flush mounting (surface wall mount box optional ASIN: B08H9Z1YH6)  Temperature compensated charge profile with battery temperature sensor ASIN: B007S3HWDA Fully programmable for any type of Lead-Acid or Lithium batteries  Made in the USA 5-Year Warranty  Specification:   Max. Recommended Panel Power: 450W (36-cell solar panel) Rated Battery (Output) Current: 30A Nominal Battery Voltage: 12V Max Panel Voltage: 30V Max Recommended Panel Voc @ STC 24V  Power Consumption: 14mA standby / 19mA display On Charge Algorithm: 3-stage plus Automatic/Manual Equalization Absorption Voltage: 14.4V - User Adjustable Float Voltage: 13.2V - User Adjustable Equalization Voltage: 15.2V - User Adjustable  Operating Temp. Range: -40°C - 40°C  Connection: 4-position terminal block for 10-30 AWG wire Panel Dimensions: 6.35 x 4.6 x 1.18" (16.1 x 11.7 x 3 cm)   Certifications: CE, FCC, RoHS

Blue Sky Energy SC30 30A PWM Solar Charge Controller with Display, Fully programmable for Lead-Acid or Lithium Batteries

Size:75-Volt, 15 Amp




























A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Victron Energy SmartSolar MPPT 75V 15 amp 12/24-Volt Solar Charge Controller (Bluetooth)

EPEVER 30A MPPT Charge Controller with LCD Display 100V Max Input 12V/24V Auto Switch

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Overview  The SB3024iL charge controller featuring our patented MPPT technology for 12/24V battery. This controller is ideal for RVs and Marine applications with its auxiliary output for charging a second battery, and can utilize a remote display with its IPN connectivity. When programmed with the IPN Pro Remote or UCM, it can be used for charging Lead-Acid or Lithium batteries. It can communicate with other Blue Sky Energy charge controllers allowing increased flexibility, optimization in system design, and improve reliability by dividing a large system with multiple controllers.   Features:  - MPPT BUCK technology - 3-Stage charge plus Equalization (if enabled)  - Battery system 12V or 24V - LED indicator for battery and DC Load status - DC Output Load with Low Voltage Disconnect  - Battery temperature compensation (for Pb batteries) with battery temp. sensor ASIN: B007S3HWDA - Fully programmable (for Pb or Li batteries) by remote display (kit RV ASIN: B087V3LHLN) - Made in the USA - 5-Year Warranty  Specifications:  @12V battery:  - Max. Recommended Panel Power: 540W (36-cell panels) or 400W (60/72-cell panels)  - Rated Battery (Output) Current: 40A (36-cell panel) or 30A (60/72-cell panel)  - Absorption Voltage: 14.4V  - Float Voltage: 13.2V  - Equalization Voltage: 15.2V (if needed)  @24V battery:  - Max. Recommended Panel Power: 800W (72-cell panels) - Rated Battery (Output) Current: 30A - Absorption Voltage: 28.8V  - Float Voltage: 26.4V  - Equalization Voltage: 30.4V (if needed)   - Max Panel Voltage: 57V - Max Recommended Panel Voc at STC 45.6V - Operating Temp. Range: -40°C - 40°C - Battery/Panel Connections: terminal block for 2-14 Gauge wire - Dimensions: 6.86 x 6.6 x 3.38" - Certifications: ETL, CE, FCC, RoHS

Blue Sky Energy Solar Boost SB3024iL MPPT Charge Controller 40A/30A, 12V/24V Battery. Auxiliary Output for Dual Battery Charge or 20A LVD Load Output

The Victron BlueSolar MPPT 100/30 solar charge controller is marine rated and ideally suited for mobile applications with flooded, AGM or lithium batteries. This charge controller can support up to 450W of solar panels at 12V or 900W at 24V. BlueSolar MPPT charge controllers are compatible with the Victron Bluetooth Dongle, MPPT Control and Color Control GX Monitor for programming and monitoring.

Victron Energy BlueSolar MPPT 100/30 Charge Controller

Victron SmartSolar MPPT Solar Charge Controller with Bluetooth – 250V 60A