Size:#2




























 Features: 1. High-end technology MPPT solar maximum power tracking charging management chip, with trickle, constant current, constant pressure charging management function.  2. Adopt imported high-frequency low-pass internal resistance double MOS tube, high-current diode, high-efficiency flat high-power inductance, Alloy current detection resistance  3. High-speed and efficient charging mode.  4. Dual status indicator, no battery when the red light flashing green light, charging when the red light is bright, full of self-stop at the same time green light.  5. The maximum power point tracking function of photovoltaic cells is realized by switching Buck Synchronous Rectifier DC-DC Conversion.     Specification: Condition: 100% Brand New  Model: BQ24650  Input Voltage: Nominal 18V, 21V(no load)  Output Voltage: Nominal 12V  Charging Current: 5A  Wiring Mode: Welding  Optional Style: 3S Li-ion Battery, 4S LiFePO4 Battery ,4S Li-ion Battery  Weight: Approx. 15g / 0.5oz  Size: Approx. 38 * 60 * 11mm / 1.5 * 2.4 * 0.4oz     Package List: 1 * Solar Panel Controller Charging Module

Solar Panel Controller - BiuZi 1Pc BQ24650 5A MPPT Solar Charge Controller Module 3S/4S LiFePO4 Lithium Battery Charging Board (#2)

Size:60A




























Specification: Condition: 100% Brand New Material: ABS Color: As Picture Shown Options: 10A, 20A, 30A, 40A, 50A, 60A Battery Voltage: 12V 24V Auto Solar panel voltage: 12V, 18V solar panel, 24V, 36V solar panel Float charge: 13.7V(defaul,adjustable) Discharge stop: 10.7V(defaul,adjustable) Discharge reconnect: 12.6V(defaul,adjustable) Self-consume: <10mA USB output: 5V / 2A Max  Package list: 1 x PWM Controller 1 x User Manual

Solar Charge Controller 12V 24V,60A Auto MPPT Solar Charge Controller Solar Panel Battery Regulator Dual USB LCD Display,Solar Charge Controller MPPT PWM Controller(60A)

Color:20A




























Specification:Condition: 100% Brand NewItem Type: Solar Charge ControllerMaterial: Aluminium Alloy Color: As shown in the pictureStyle: 10A, 20A, 30A(Optional)Size: Approx.155x132x76mm/6.1x5.2x3inWeight: Approx.1345g/47.4ozModel: MPPT-MINI-10AMPPT-MINI-20AMPPT-MINI-30Avoltage range: 12V SystemDC9V-DC16V24V SystemDC18V-DC32V48V SystemDC42V-DC60V96V Systeminput voltage range: 20V ~ 100V (12V system)40V ~ 150V (24V system)80V ~ 150V (48V system)Temperature compensation: 0-4Overtemperature protection: Reduce current at 70℃, and turn off charging and DC load at 90℃Operating temperature: -20℃-50℃Storage temperature: -40℃-80℃Humidity: 10％-90％ Package List:1 x Solar Charge Controller2 x Fixing Plate1 x Bag of Screw(5pcs)1 x English Manual Note:1. Please allow 1‑2cm error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

MPPT Solar Charge Controller 10A/20A/30A Photovoltaic Instrument Intelligent Regulator Renewable Energy Controllers with LCD Display - Supports Data Storage(20A)

MPPT Solar Charge Controller P60 ,60A , 12V/24V Auto WorkP60A mppt solar charge controller is P series new upgrade version，Better funcations and advanced technology .Added Features: ★Blacklight LCD Display ★The display directly shows the amount of charge: KWH, without the need for other measuring instruments★Two new vents are added for scientifically designed convection cooling.★More Safety Protection★Maximum DC/DC transfer efficiency is as high as 98.7%P60 Technical datas : Rated charge current:60A12V system:open circuit voltage ≤96V(Voc) maximum. PV input power:720W24V battery system:Open circuit voltage ≤96V(Voc) maximum.PV input power:1440WSystem nominal voltage :12V/24VDC Auto identifyingBattery voltage range: 9V~32VMax.PV open circuit voltage:100VDCPower terminal:10 AWGDimension: 7.78*7.78*3.2（in）Weight : 3.3(ib)Protection function: PV Over Current/powerPV Short CircuitPV Reverse PolarityNight Reverse ChargingBattery Reverse PolarityBattery Over VoltageBattery Over DischargeBattery Overheating,Controller Overheating  Lithium Battery Low TemperatureLoad Short CircuitLoad OverloadTVS High Voltage TransientsPackage List: 1 x 60A MPPT Solar Charge Controller P601 x Temperature sensor1 x User Manual (English)

First Solar MPPT Charge Controller 60 amp, 12V 24V Auto 60A Solar Panel Charge Regulator, Max 100V Input with LCD Display for Lead-Acid Sealed Gel AGM Flooded Lithium Battery

First Solar MPPT Solar Charge Controller K100 ,100A , 12V/24V Auto WorkK series mppt solar charge controller is P series new upgrade version，Better funcations and advanced technology .Added Features: ★Blacklight LCD Display ★The display directly shows the amount of charge: KWH, without the need for other measuring instruments★Two new vents are added for scientifically designed convection cooling.★More Safety Protection★Maximum DC/DC transfer efficiency is as high as 98.7%K100 Technical datas : Rated charge current:100A12V system:open circuit voltage ≤48V(Voc) maximum. PV input power:1300W24V battery system:Open circuit voltage ≤96V(Voc) maximum.PV input power:2600WSystem nominal voltage :12V/24VDC Auto identifyingBattery voltage range: 9V~32VMax.PV open circuit voltage:100VDCPower terminal:10 AWGDimension: 12.2*8.3*4.3mmWeight : 5LBProtection function: PV Over Current/powerPV Short CircuitPV Reverse PolarityNight Reverse ChargingBattery Reverse PolarityBattery Over VoltageBattery Over DischargeBattery Overheating,Controller Overheating  Lithium Battery Low TemperatureLoad Short CircuitLoad OverloadTVS High Voltage TransientsPackage List: 1 x 100A MPPT Solar Charge Controller K1001 x Temperature sensor1 x User Manual (English) The solar controller is a professional product, if you have any questions, please send an email to us first; we will answer you the first time; worry-free after-sales guarantee.

First Solar MPPT Charge Controller 100 amp 12V/24V Auto, 100A Solar Panel Charge Regulator with Blacklight LCD Display Max 100V for Lead-Acid Sealed Gel AGM Flooded Lithium Battery

Size:100A




























Specification:Condition: 100% Brand NewMaterial: ABSColor: As Picture ShownOptions: 40A, 50A, 60A, 100ABattery Voltage: 12V 24V AutoSolar panel voltage: 12V, 18V solar panel, 24V, 36V solar panelFloat charge: 13.7V(defaul,adjustable)Discharge stop: 10.7V(defaul,adjustable)Discharge reconnect: 12.6V(defaul,adjustable)Self-consume: <10mAUSB output: 5V / 2A MaxPackage list:1 x Controller1 x User Manual

Senyar Solar Charge Controller, MPPT 40/50/60/100A Solar Charge Controller Dual USB LCD Display olar Charge Regulator Battery Charger Renewable Energy Controllers 12V 24V(100A)

This is a compatible PWM charge controller PWM intelligent/efficient/energy saving, he not only has efficient PWM controller charging function to automatically track the maximum power point, 10%-30%higher than the ordinary controller charging efficientcystandby energy savingAlso has more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA. This is a three-Period(time) controllerinto the evening (evening) working timean interval of rest or pause timeDawn working time (morning light function)the user can according to their needs ,set a different time.  A: time(evening working);B: time(Pause working); C: time(dawn working) Warm Tips:1. Always connect the battery before connect the solar panel, disconnect in reverse order.2. Make sure your battery has enough voltage for the controller to recognize the battery type3. If an inverter is to be connected to the system, connect the inverter directly to the battery, not to the load side of the controller.4. A fuse which current is 1.25 to 2 times the rated current of the controller, must be installed on the battery side with a distance from the battery not greater than 150 mm.Description: LCD screen display Easy operation interfacePWM charging modeParameter user can resetA key to open and close the loadA key to restore the factory settingsBattery reverse discharge protectionBattery reverse polarity protectionBattery under voltage protectionOverload, short-circuit protectionAutomatic temperature compensation function,Can charge and discharge at the same time, Always keep the battery in full statusUSB 5V charge (current 1500mA) Optional  Package contents: 1* L80A PWM Solar Controller 1* English User Manual 1* Temp Sensorand

Solar Charge Controller 80A PWM 12V 24V 1920W Solar Panel Charger Discharge Regulator with 5V USB Output Multip Circuit Protection Anti-Fall Durable ABS Housing Heat Sink (L80A)

iSunergy MPPT Solar Charge Controller 50A 12V/24V Auto Solar Panel Intelligent Regulator with Dual USB Port LCD Display for Lead Acid Batteries

This new intelligent 80 Amp Solar Charge Controller is one of the most popular solar panel charge controllers in OOYCYOO's product, the controller has an efficient charging system and can handle high power input reach to 1920W, this controller equipped with industrial-grade STM 8 microprocessor to control the charge and discharge process. And, it has perfect and liable battery charge and discharge period management. The charge circuit is characterized by high efficiency and low consumption by controlling the MOSFET of the ultra-low internal resistance with PWM. This controller has multiple load control modes and is adaptable to different industries. the housing of this controller is made of superior quality ABS material that is extra durable.USB output port also equipped with this controller for electrical devices charging. User Manual is available for Download Technical Parameter  Rated Working Current: 80 Amps  Rated Working Voltage: 12V/24V DC Auto Max PV Array Input Voltage / Watts (Battery Voltage): 24V/960W(12V), 48V/1920W(24V)  No Load Loss: <13mA Loop Voltage Drop: ≤100mV Battery Float Voltage: 13.8V(12V System)/27.6V(24V System) Battery (under voltage) Protection:10.6V(12V System)/21.2V(24V System) Battery (under voltage) Recovery Voltage:12.6V(12V System)/25.2V(24V System) Temperature Compensation: -4mv//cell Installable Max.Cable: 3AWG Working temperature: -14℉~140℉ Storage temperature: -22℉~158℉ Installed Dimension: 7×3.81 in Our controller is backed by FULL MONEY BACK GUARANTEE! If for any reason you are not satisfied with this purchase, kindly contact us and our dedicated world class customer support team will offer a replacemenor full refund without any cost from your side!

First Solar Charge Controller 80A PWM 12V 24V 1920W Solar Panel Charger Discharge Regulator with 5V USB Output Multip Circuit Protection Anti-Fall Durable ABS Housing Heat Sink (S80A)

This EPEVER 60a charge controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc. Specifications:  Model:VS6024AU  Nominal system voltage:12 24Vdc auto work  Battery input voltage range: 9V～32V Rated charge/discharge current:60A Max. PV open circuit voltage: 50V Terminals: 4AWG(25mm2) *USB output: Max. 5V/2.4A Battery type: Sealed(Default) / Gel / Flooded /User Boost charging voltage:Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V Equalize charging voltage:Sealed:14.6V/ Gel: No/ Flooded:14.8V Float charging voltage:Sealed/Gel/Flooded:13.8V Low voltage reconnect voltage:Sealed/Gel/Flooded:12.6V Low voltage disconnect voltage:Sealed/Gel/Flooded:11.1V Self-consumption:≤9.2mA(12V): ≤12.6mA(24V) Temp. compensation:-3mV/℃/2V(77℉) Working temperature:-13℉ ~ 131℉(Product can work continuously at full load) Extensive Electronic protections: PV short circuit protection PV reverse polarity protection Battery over voltage protection Battery over discharge protection Battery reverse polarity protection Battery overheating protection Battery reverse polarity protection Load overload protection Load short circuit protection Package List: 1 x VS6024AU Solar Charge Controller 1 x Temperature Sensor 1 x English User Manual

EPEVER 60A Solar Charge Controller 12V 24V Auto - 12V/720W 24V/1440W Input, Solar Regulator 60a with Temperature Compensation and Dual USB 5V Output

EPEVER 10A MPPT Solar Charge Controller 12V 24V Auto, Max 60V Input Negative Grounded Solar Regulator with LCD Display for Gel Sealed Flooded Lithium Battery

EPEVER MPPT 40A Solar Charge Controller, 40 Amp Charge Regulator 12V/24V Auto Max 100V Input Negative Grounded Controller with LCD Display for Gel Sealed Flooded Lithium Battery Charging

Size:Phoenix 200




























Integrating a 189Wh high energy density solar generator in a compact form, the Renogy Phoenix 200 portable power generator is ready to power your off-grid adventures. Equipped with multiple output ports, this portable power station can charge a variety of devices and small appliances simultaneously. This solar charger conveniently supports multiple charging options and can be charged via an AC outlet, a car socket, or a solar panel. The Phoenix 200 portable generator's handle features built-in powerful LED lights on either side with four different modes to tackle a variety of situations. Make your next outdoor activity a breeze with clean, convenient energy from a Renogy Phoenix 200 Power Station.

Renogy Portable Solar Generator Phoenix 200, 189Wh Pure Sine Wave Power Station, Backup Lithium Battery Solar Charger with Quick Charge USB, Type-C, D-Tape, AC Outlet for Outdoor Camping Camcorder

EPEVER MT50 Remote Meter LCD Screen Display, Monitor and Set Data of EPEVER TracerAN TRIRON N Tracer-BN VS LS-B Series MPPT&PWM Solar Charge Controller

Features: 1. Automatically manage the working of solar panel and battery in solar system. 2. Overloading and short-circuit protection. 3. Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection. 4. Protection from lightning strike. 5. Prolong the battery life cycle and keep the load work well. 6. Easy to set up and operate. 7. Suitable for small solar energy system.  Specifications: - Batt voltage: 12V/24V auto - Charge current: 30A - Discharge current: 30A - Max Solar input: <50V - Equalization: B01 sealed 14.4V - B02 Gel 14.2V - B03 flood 14.6V - Float charge: 13.7V(defaul,adjustable) - Discharge stop: 10.7V(defaul,adjustable) - Discharge reconnect: 12.6V(defaul,adjustable) - USB output: 5V/3A - Self-consume: <10mA - Operating temperature: -35~+60 degree C  Package Include: 1X 30A Solar Charge Contorller 1X English User Manual  Note: <1>Please keep it in cool and well ventilated place to maintain good heat dissipation. <2>Make sure your battery has enough voltage for the controller to recognize the battery before first installation.

FANCY NOVA 20A Solar Charge Controller, Solar Panel Controller 12V/24V PWM Auto Paremeter Adjustable LCD Display Solar Panel Battery Regulator with Dual USB Port

Product specification:   Rated charging current: 10A Rated charging voltage: 12V/24V automatic Voltage tolerance: ±0.3V Low voltage shutdown: 10.7V/21.4V Floating voltage: 13.7V/27.4V Low voltage recovery: 12.6V/25.2V Standby current: ≤30mA Load voltage drop: ≤170mA Charging mode: PWM Mode USB output: 5V/4A Working environment temperature: -10°C~50°C Mounting hole size: 126*69mm Product size: 134*83.5*35mm Product weight: 185g       Product Features:  10A solar controller: Built-in industrial microcontroller, which can automatically manage the work of solar panels and batteries in solar systems. The solar charger controller with a rated discharge current of 10A is automatically compatible with 12V or 24V systems and is suitable for OPEN, AGM, and GEL lead-acid batteries. 4 USB 5V/3A output ports support mobile phones, tablets or other devices that require 5V voltage. LCD display: Clearly indicate status and data, can easily switch modes and parameter configuration, parameters can be adjusted, suitable for household, industrial, commercial and other adjustable parameters. Multiple protection functions: BYGD solar controller has short circuit protection, open circuit protection, reverse protection, overload protection and full 3-level PWM charging management, which can improve system efficiency and extend battery life. Easy to install and operate: The charge controller should be connected to the battery first, then to the solar panel, and finally to the load! You can change the settings with a simple one-button operation.       Packing list:  1 10A solar controller  1X English User Manual

BYGD 10A Solar Charge Controller, Solar Panel Charger Controller 12V/24V, Multi-Function Adjustable Parameter Backlight LCD Display with 4 USB Ports Timer Setting PWM Auto Parameter

This pre-owned or refurbished product has been professionally inspected and tested to work and look like new. How a product becomes part of Amazon Renewed, your destination for pre-owned, refurbished products: A customer buys a new product and returns it or trades it in for a newer or different model. That product is inspected and tested to work and look like new by Amazon-qualified suppliers. Then, the product is sold as an Amazon Renewed product on Amazon. If not satisfied with the purchase, renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee.

Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium, Sealed, Gel, and Flooded batteries and Renogy Bluetooth Module (Renewed)

Size:20A




























How to connect solar system with the controller:  Step 1:Connect the battery to the solar charge controller firstly- plus and minus.(need to choose battery type)  Step 2: Connect the solar panel to the controller secondly.  Step 3: Connect the load to the controller finally - plus and minus. ♥ Note: The reverse order applies when de-installing.  Specification: ◆ Main Color: Blue◆ Rated Charging Current: 20AMP◆ Rated Discharging Current: 20AMP◆ Max Solar Input Voltage: ＜50V◆ System Voltage:11.1V/12V/12.8V/22.2V/24V/25.6V ◆ Stand-by Lost: ＜15mA◆ Battery Type: 12V/24V Lead Acid, 3S/6S/7S Lithium Ion, 4S/8S LifePo4 Operating Temperature: -20 ~ +50℃◆ Storage Temperature: -30 ~ +70℃◆ Maximum Wire Size: 10AWG/5mm²◆ Size:151x86x36mm ◆ Weight: 220g ◆USB Output: 5V/2A (max)  Package Include：● 1pcs 20AMP Solar Charge Controller ● 1pcs English User Manual Safety Instructions:  A) Make sure your battery has enough voltage for the controller to recognize the battery type before first installation or adjusting default parameter, and also need to choose the corresponding battery type.  B) The charge regulator is only suitable for regulating solar panels. Never connect another charging source to the charge regulator.  C) Disconnect all sources of power to the controller before installing or adjusting, and don’t disconnect battery during charging, because it may causes a brief pike in load voltage which may damage sensitive equipment.  D) The battery cable should be as short as possible to minimize loss. Use only well-isolated tools.  E) This solar controller is not waterproof, if you need waterproof type, pls kindly check the other controller ASIN B07CK2PCC7, thanks

HUINE 20A Solar Charge Controller 12V 24V PWM Solar Regulator Compatible for Lithium ion/Lifepo4/lead Acid Batteries with LCD Display&5V USB &Adjustable Parameter