Specification: Material: Plastic Weight: 837g/29.5oz   Model: DSE5110  Power supply: DC 8~35V continuous Start relay output:16AmpDC system DC voltage Fuel relay output: 16Amp DC system DC voltage Auxiliary relay output: 5Amp DC system DC voltage Operating temperature range: -30 ~ +70C Charging failure/excitation range: 0V~35V Maximum operating current: 425(12V); 215MA (24V)  Starting voltage drop: when the voltage provided before starting is not less than 10V and the voltage recovery voltage reaches 5V, the control system can be ensured to maintain normal after 50ms of 0V voltage. There is no need to add a built-in battery.  DSE 5110 controller display parameters: Generator phase voltage L1-N, L2-N, L3-N; Generator line voltage L1-L2, L2-L3, L3-L1; Generator current L1, L2, L3; Generator frequency Hz; Generator speed RPM; Engine Oil Pressure (PSI & Bar); Engine water temperature (℃ & ° F); Battery Voltage Unit operating time; DSE5110 controller alarm/ stop protection: Underspeed/ overspeed, alarm/ stop; Battery charging failure, alarm; Emergency stop;stop; Low oil pressure, alarm/ stop; High water temperature, alarm/ stop; Start failure, alarm; Speed signal loss, stop;  Package List: 1 x Generator Controller

Mootea Generator Controller,DSE5110 Generator Electronic Controller Module Control Panel LCD Display

Size:40A MPPT-BT




























Key Features Automatically detects 12V/24V DC system voltages High tacking efficiency of 99% Peak Conversion efficiency of 98% 4-stage charging with MPPT output Extensive electronic protections Diverse load control LCD screen with programmable charging parameters Charging data with storage of up to 1 year Die-cast aluminum design for heat dissipation Specifications Nominal system voltage: 12V/24V Auto Recognition Rated Battery Current: 40A Rated Load Current :20A Max. PV Input Short Current :50A Max. Battery Voltage: 32V Max. Solar Input Voltage: 100 VDC Discharge circuit voltage drop: ≤ 0.15V Mounting Oval: 0.3 x 0.2 in Net Weight: 4.4 lb. Overall Dimension: 9.4 x 6.8 x 2.9 in Warranty 2 year warranty

RICH SOLAR 40 Amp 12V/24V DC Input MPPT Solar Charge Controller with Bluetooth and LCD Screen and Multiple LED Indicators

Size:12/24-Volt, 10 Amp




























The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C.

Victron Energy Orion-Tr Smart 12/24-Volt 10 amp 240-Watt DC-DC Charger, Isolated (Bluetooth)

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, Victron Energy SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. Victron Energy SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Victron Energy SmartSolar MPPT 100V 20 amp 12/24/48-Volt Solar Charge Controller (Bluetooth)

Feature 1. Made of fiberglass material, fine workmanship and durable to use 2. Can be used for 100LED solar string lights, solar copper wire string lights, solar studs and other lamps. 3. Comes with a power switch and a lighting mode switch, easy to operate 4. Can be connected to 1.2V NiMH batteries and 2V solar panels 5. The maximum withstand charging current is 400mA, discharge current is 100mA 6. With 8 lighting modes for you to choose  Specification: Item Type: Solar Lamp String Controller Module Model: SS1208 Material: Fiberglass Introduction To Mode Switching:  1: 2-8 function cycle 2: Star flash 3: Double flash 4: One way fades in and out 5: 4 single flashes, 4 double flashes 6: All fade in and out 7: 4 single flashes 8: All onSize: Approx. 38.2 x 25.3mm / 1.5 x 1in  Package List: 2 x Module 1 x User Manual

2Pcs Solar Lamp Controller Module Control Circuit Board with Switch, 1.2V 8 Kinds Light Mode Solar Lawn Lamp Control Board

Pikasola Wind Turbine Generator 12V 400W with a 30A Hybrid Charge Controller. As Solar and Wind Charge Controller which can Add Max 500W Solar Panel for 12V Battery.

PowMr & Srne 60A MPPT Charge Controller 60 amp 12V 24V 36V 48V AUTO - Negative Ground Solar Charge Regulator Max 150V 3200W Input for Lithium,Sealed,Gel,Flooded Battery with Bluetooth Module Backlight

GCSOAR Solar Charge Controller 40A 12V 24V Auto PWM Solar Panel Charger Regulator Parameters Adjustable LCD Display for Leaded,Gel(AGM),Flooded Type (40A, 12V/24V)

System Voltage: 12V 24V AutoCharge current: 40A Max input voltage: 24V(12V system); 48V(24V system)Max input power: 520W(12V system); 1040W(24V system)USB output: Dual USB output, 5V/2.5ABatteries:Only fit for OPEN, AGM, GELSelf-consume: <10mATemperature: -35℃~+60℃Size/Weight: 193mm*51mm*98mm/390gFloat charge: 13.7V(defaul,adjustable)Discharge reconnect voltage:12.6V(defaul, adjustable)Discharge stop voltage: 10.7(defaul, adjustable)Turn ON/OFF light voltage: Solar pannel 8V.Load mode: 1. 【24H】 Load always turn on. [except your battery's voltage is too low to read] 2. 【0H】Light control mode. [controller recognize voltage auto, if solar panel's voltage under 8V, Load will turn on] 3. 【1-15H】Light controller+ Set an specific time to turn off your load. MENU：1. Press to browse parameters. 2.Press and hold about 3 seconds to enter detail setting UP: Press to increase value DOWN: Press to decrease value TIPS OF INSTALLTION: (ALWAYS CONNECT BATTERY FIRST!!) Step 1, Screw the adjustment screw counter clockwise until the plates moves down. Step 2, Please peel off the coating of the cable tip by about 8 to 10 mm, then insert the wire into the new opening between the plate and the "top" of the Terminal hole, not under it. Step 3, Screw the adjuster clockwise and the plate will move upwards thereby squishing the wire in the Terminal hole, Make sure all connections are tight. NOTE : 1) Charge Controller should connect in the order of 1)Battery array 2)Solar panels 3)DC load .The disassembly sequence is contrary to the wiring order.2) Make sure batteries's voltage between 9V-15V for 12Volt system and 18V-30V for 24Volt system so that the Charger controller can recognize the normal battery type and system in first connection.

PowMr Solar Charge Controller 40A - Solar Panel Charge Controller 12V 24V, Adjustable Parameter LCD Display Current/Capacity and Timer Setting ON/Off with 5V Dual USB

Size:BT-1 Bluetooth Module with RS232




























The Renogy BT-1 is a great addition to any compatible Renogy solar charge controllers. Powered by its RJ12 communication port, the BT-1 provides wireless monitoring of system data through the Renogy DC Home smart phone App. And allows users to change parameters when using the Renogy DC Home App.

Renogy Bluetooth Module RJ12 Communication Port Compatible Rover/Wanderer/Adventurer Charge Controllers, BT-1 RS232

Pikasola Wind Turbine Generator 400W 24V with 3 Blade 2.5m/s Low Wind Speed Starting Wind Turbines with Charge Controller, Windmill for Home

Features:1. High-end technology MPPT solar maximum power tracking charging management chip, with trickle, constant current, constant pressure charging management function.2. Adopt imported high-frequency low-pass internal resistance double MOS tube, high-current diode, high-efficiency flat high-power inductance, Alloy current detection resistance3. High speed and high efficiency charging mode4. Dual status indicator, no battery when the red light flashing green light, charging when the red light is bright, full of self-stop at the same time green light.5. The maximum power point tracking (MPPT) of solar cells is to ensure that the photovoltaic cells always output the maximum power when the illumination intensity changes, so as to make full use of solar energy. Specification:Condition: 100% Brand NewModel: BQ24650Input Voltage: Nominal 18V, 21V(no load)Solar Panel Power Option: 40-60WOutput Voltage: Nominal 12VCharging Current: Max.5AWiring Mode: WeldingStyle: 3S Li-ion BatteryWeight: Approx. 99g / 3.5ozSize: Approx. 65 * 49 * 34mm / 2.6 * 1.9 * 1.3in Package List:1 * Solar MPPT Controller Charger

Eurobuy BQ24650 18V 5A MPPT Solar Panel Controller Charger Module 3S Lithium Battery Charging Board Welding Wiring Mode

Features: 1. This controller is designed for mixed-air solar street lighting systems. It can optimally configure wind-solar hybrid street lighting systems of various resources. Of course, controllers with some simple settings can also be used in home systems. 2. The intelligent design logo has simple structure, controllable power, stable performance and safe and reliable products. 3. Select MPPT wind charging mode, the charging efficiency is superior to the ordinary PWM mode. 4. The boost charging function solves the problem of low charging efficiency at low wind speed (optional). Professional digital intelligent control. 5. MPPT wind solar hybrid charging controller's unloading resistance, suitable for wind/solar hybrid charging controller system above 12/24V 400W fan  Specification: Condition: 100% Brand New Item Type: Wind Solar Hybrid Charge Controller Color: Shown as Picture  Package List: 1 * Wind Solar Hybrid Charge Controller

MPPT Wind Solar Hybrid Charge Controller Dump Load Solar Hybrid Controller Solar Charge Controller for Above 12/24V 400W Fan

Taidacent CN3791 Solar Chargers MPPT Solar Battery Charger 6V 12V MPPT Solar Charge Controller 3.7V 4.2V 2A Li Battery Charging Board Module (12V)

Color:K40A




























This is a MPPT solar charge and discharge controller;  the charging efficiency is 15%-25% higher than that of ordinary ordinary solar controllers;  the MCU precisely controls the MOSFET switch to control the battery charge and discharge, effectively extending the battery life;  Product parameters Rated charge current:40A 12V battery system:open circuit voltage ≤48V(Voc) maximum. PV input power:520W 24V battery system:Open circuit voltage ≤96V(Voc) maximum.PV input power:1040W System nominal voltage :12V/24VDC Auto identifying Battery voltage range: 12V/24V Max.PV open circuit voltage:96VDC Power terminal:8AWG Dimensions:11.8 * 7.87 * 3.95 (in) Weight: 5.6lb Warm Tips: Battery must be connected first ! Never connect the solar panel array to the controller Without/Before a Battery. Never connect any inverter/ wind/ Alternator/ Charger into the charge controller! Ensure the battery voltage is enough.(>9V) Never exceed the max input power/Voltage of your controller. Package List: 1 x 40A MPPT Solar Charge Controller K40A-new 1 x Temperature sensor 1 x User Manual (English)1 x screw

40Amp MPPT Solar Controller 100V Input Tracker for Lithium Iron Phosphate LiFePO4 (Lead Acid AGM) Charger, Solar Panel Maximum Input 520W/1040W (12V/24V) Automatic (K40A)

Size:20A w/ USB Output




























Every solar-powered system requires regulation to prevent battery damage, from eco-conscious homeowners to self-taught underground bunker builders, anyone using a solar panel larger than small trickle systems needs some sort of battery regulation, which is where solar charge controllers come in. This PWM Solar Charge Controller is a great cost-efficient alternative to an MPPT charge controller. With all the essential functions in a compact control panel controllerSpecification:20A 12V-24V Solar Charge ControllerSystem Voltage: 12V/20V AUTODischarge current: 10MACharge Current: 10A/20AMax. PV Voltage: 50VMax input power and voltage: 260W /12V; 520W/24VFloating charge: 13.7V/27.4V (default)Discharge Stop: 10.7V/21.4V (default)Charge recover voltage: 12.6V/25.2V (default)Load Mode Timer: 24 hours, 1-23 hours, 0 hourWorking Temperature: -35 to 60 degree CelsiusApplication: Home, Industrial, CommercialPackage Content:1x PWM Solar Charge Controller LCD Display (20A amp 12V 24V volt) Multi-Function Adjustable Load Regulator, Battery Charger, Street Light Timer Dual USB Port Solar Panel Battery Renewable Power

Flexzion PWM Solar Charge Controller LCD Display (20A amp 12V 24V volt) Multi-Function Adjustable Load Regulator, Battery Charger, Street Light Timer Dual USB Port Solar Panel Battery Renewable Power

EPEVER 40A MPPT Solar Charge Controller 12V/24V Auto Working Max.PV 150V Solar Panel Charge Regulator Tracer BN Series Negative Ground Solar Controller

Size:250-Volt, 100 Amp - MC4 VE. Can




























"A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged."